Anti-Abrasion Waterproof Decorative Insulation Board / Panel With Uv Coating For External Wall Decor WD-DI04 manufacturer from China Shanghai Weidi Industrial Company

Anti-Abrasion Waterproof Decorative Insulation Board / Panel With Uv Coating For External Wall Decor

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: WD-DI04

Anti-abrasion water proof decorative insulation panel with UV coating for external wall decoration Specifications:

Anti-abrasion water proof decorative insulation panel with UV coating for external wall decoration

Specifications:

Product			Performance
UV coatingDecorative Insulation Board	Decoration Layer	UV coating decorative board	Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance	Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years.
	Insulation Layer	EPS insulation layer (Grade B1)	Heat conductivity ≤0.041. volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.
		XPS insulation Layer (Grade B1)	Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance. 30-40 years average using life. Excenllent structure load-bearing performance .
		Polyurethane insulation board (Grade B1)	Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the density of 35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to half of the EPS, is the lowest heat conductivity of all the insulation materials .
		TPS insulation board (Grade B1)	Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa
		Rock wool (Grade A)	Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees. Moisture absorption: 3.9%. Organic content: 2.9%. Rockwool board basic parameters: Material: rockwool Apparent density: Rockwool 120 (kg / m3) Heat conductivity: 0.04 (W / (m.K)) Max operating temperature: 80 () Specifications: 950,1150 (mm ) Operation standard: GB Operating temperature: 80 ()
		Phenolic Foam Board(Grade B Grade A)	Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

Weidi Decorative Insulation Board overall dimension specification

Test Item		Detection standard and requirements		The third party test results
Dimensional Deviation	Length(mm)	GB/T7748-1999	±1.5	-1.0~0
	Width(mm)		±1.5	-1.0~0.5
	Thickness(mm)		±0.5	-0.2~0.1
	Diagonal difference(mm)		≤2.0	0.5
	No straight degree in Border(mm/)		≤2.0	0
	Warping degree(mm/m)		≤3.0	0

Weidi Decorative Insulation Board final product facing layer performance
(varieties: solid color/metal/stone/wood grain/special effects, etc.)

Test Item	Detection standard and requirements		The third party test results
Coating thickness(μm)	GB/T13452.2- 2008-10	≥30	199
Coating adhesion(MPa)	GB/T5210-2006	≥0.3	1.7(0.8-2.7),100%A
Hardness(Pencil)	GB/T6739-2006	≥4H	6H No scraping damage
Abrasive resistance(750g/500r) ,Suitable grinding wheel type:CS-10	GB/T1768-2006		0.003
Solvent resistance wiping(Butanone, 100times)	HC/T-3792-2005 Appendix	No undercasing	Meet the requirement
Acid-resistance(5%HC1 liquor,24H)	GB/T9274-1998	No blistering,No Falling off,non-discolouring	No Change
Alkali resistance	GB/T9274-1998	No blistering,No Falling off,non-discolouring	No Change
Abrasion performance	HC/T3793-2005- 4.1/4.3	≥5	12
Stain resistance	GB/T9757-2001 Appendix A	≤5	5
Scrub resistance	GB/T9266-2009	≥10000	>10000
Oil resistant(Immerse in engine oil SE15W-40 24H)	GB/T9274-198888	No blistering,No Falling off,non-discolouring	No Change
Alkali burnout resistance(72H)	JG/T210-2007		No abnormalities
Salting-out resistance(144H)	JG/T210-2007		No abnormalities
Weather resistance	GB/T1865-2009,GB/T1766-2008	Artificial climate ageing and radiation exposure	4000Hrs after testing,Dulling≤3Grade, Discoloration≤2Grade

Description:

Decoration Veneer Layer: UV Coating
Carrying Layer: Aluminium plate;Calcium silicate board;Cement pressure plate;
Insulation Layer: Rock wood plate

Surface is repeatedly polished, permeated, waterproof , UV coating board is a a new type of inorganic fire
dalle high simulation baord used the special fiber reinforced cement as base material, after roller coating
and spray coating layer the fluorocarbon paint, then printing the prepaired natural stone colour and
pattern UV fluorocarbon film on the based board by the thermal transfer process,after that again roller
coating and spray coating layer the fluorocarbon paint , finally 13 times uv-curable process.

Applications:

Business Organizations

It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project.

Competitive Advantage:

UV coating decorative insulation board due to the special surface patterns, which can be designed not only
like the stone but also can designed as the wood timber veneer. There for its surface can be used not
only indoor but also outdoor.

The features are:
⇒Precious stone pattern, color, luster can be designed as required;
⇒Waterproof, fireproof, pollution resistance, scratch resistant, friction resistance, acid and alkali
resistance;
⇒Impact resistance, uv resistance, weather resistance;
⇒More than 25 years outdoor using life .