Item

Performance Index

Weather Resistance

Surface without cracks, hollowing, flaking, blistering.Tensile adhesive strength in the surface layer and the insulation layer is not less than 0.10Mpa, Undermine interface should be located within the insulation layer.

Wind Resistance

Not less than the project design wind load value (safety factor of not less than 1.5)

Water Absorbing Capacity

water absorption capacity after 24h immersion less than 500g/

Impact Resistance

Building the first floor wall under 2.4 m:Grade 10J

Above second floor wall :Grade:3J;

Freaing &Trawing Resistance

After 30 freeze-thaw cycles, the system without hollowing, shedding, no seepage cracks;

Tensile strength of the protective layer of the insulation layer is not less than 0.1Mpa, destruction of the interface should be located within the insulation layer.

Wet Steam Flow Density

    ≥0.85g/·h

The plaster layer no water permeability

2 hours the sample no water permeable at inner side

Adhesive strength Test

≥0.4Mpa(On average)

≥0.3MPa (Min)

Business Organizations

Indoor and outdoor heat and sound insulation.