Product

Performance

Metal Fluorocarbon Painting Decorative Insulation
Board

Decoration
Layer

Metal Fluorocarbon paint decorative board

High hardness, impact resistance, anti-buckling, wear resistance, anti-corrosion ,acid, salt. free Maintenance,self-cleaning no dust sticked, strong adhesion,weather resistance

 No chalking & fading, over 25 years long service life . with the  excellent insulation performance, low thermal conductivity and stability,no affected by temperature and humidity changes,and with the anti-water , permeability and other characteristics, to keep the whole building to achieve the constant temperature and humidity, constant oxygen.

Insulation Layer

EPS insulation layer
(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer
(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board
(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board
(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 ()
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 ()

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

        Test Item

Detection standard and requirements

The third party test results

 
Dimensional Deviation

Length(mm)

 
 
GB/T7748-1999

±1.5

-1.0~0

Width(mm)

±1.5

-1.0~0.5

Thickness(mm)

±0.5

-0.2~0.1

Diagonal difference(mm)

≤2.0

0.5

No straight degree in Border(mm/)

≤2.0

0

Warping degree(mm/m)

≤3.0

0

Business Organizations

It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project.