|
Shanghai Weidi Industrial Company
|
Scratch Resistant Waterproof Uv Coating Decorative Insulation Board For External Wall Decoration
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Scratch resistant waterproof UV coating decorative insulation board used for external wall
UV Coa
Scratch resistant waterproof UV coating decorative insulation board used for external wall
UV Coating Decorative Insulation Board
Specifications:
|
Product |
Performance |
|||
|
UV coatingDecorative Insulation Board |
Decoration Layer |
|
Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance |
Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years. |
|
|
EPS insulation layer (Grade B1) |
Heat conductivity ≤0.041. volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa. |
||
|
XPS insulation Layer (Grade B1) |
Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance. 30-40 years average using life. Excenllent structure load-bearing performance . |
|||
|
Polyurethane insulation board (Grade B1) |
Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the density of 35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to half of the EPS, is the lowest heat conductivity of all the insulation materials . |
|||
|
TPS insulation board (Grade B1) |
Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa |
|||
|
|
Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees. |
|||
|
Phenolic Foam Board(Grade B Grade A) |
Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread |
|||
Weidi Decorative Insulation Board system performance index
|
Item |
Detection standard and requirements |
The third party test |
||
|
|
JF149-2003, |
After weather resistance test, |
No damage such as |
|
|
JG149-2003, |
Impact-resistance strength |
|||
|
Water absorption |
JG149-2003, |
≤500 |
21 |
|
|
Wind pressure |
JG149-2003, |
Not less than the wind load |
After 15 kpa level wind |
|
|
Freezing and |
JG149-2003, |
No surface cracking,hollowing, |
No surface cracking, |
|
|
Steam flow density g/(·H) |
JG149-2003, |
≥0.85 |
2.36 |
|
|
Watertightness |
JG149-2003, |
Sample protective layer inside |
Sample protective layer |
|
|
Thermal conductivity W/(m·k) |
GB/T10801.1-2002, |
≤0.041 |
0.033 |
|
|
Apparent density |
GB/T10801.1-2002, |
18.0-22.0 |
19 |
|
|
The compressive |
GB/T10801.1-2002, |
≥0.10 |
0.10 |
|
|
Dimensional |
GB/T10801.1-2002, |
≤0.30 |
Length Change 0.13 |
|
|
Width Change 0.15 |
||||
|
Thickness Change 0.24 |
||||
|
Compression |
GB/T10801.1-2002, |
Shanghai Weidi Industrial Company [China (Mainland)]
Business Type:Manufacturer | ||
