Decorative Aluminum Panel EIFS Insulation Board Exterior Wall Panels WD-DI07 manufacturer from China Shanghai Weidi Industrial Company

Decorative Aluminum Panel EIFS Insulation Board Exterior Wall Panels

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: WD-DI07

Decorative Aluminum Panel EIFS Insulation Board Exterior Wall Panels Weidi Decorative Insula

Decorative Aluminum Panel EIFS Insulation Board Exterior Wall Panels

Weidi Decorative Insulation Board system performance index

Item	Detection standard and requirements			The third party test results
Weather resistance	JF149-2003, JGG144-2004		After weather resistance test, No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack appear.	No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack
Weather resistance	JG149-2003, JGJ144-2004			Impact-resistance strength grade:10
Water absorption g/,Immersed 24H	JG149-2003, JGJ144-2004		≤500	21
Wind pressure resistance value KPa	JG149-2003, JGJ144-2004		Not less than the wind load design value of the project	After 15 kpa level wind load esistance test,,no water seepage
Freezing and thawing resistance	JG149-2003, JGJ144-2004		No surface cracking,hollowing, blistering,exfoliation	No surface cracking, hollowing,blistering, exfoliation
Steam flow density g/(·H)	JG149-2003, JGJ144-2004		≥0.85	2.36
Watertightness	JG149-2003, JGJ144-2004		Sample protective layer inside without water infiltration	Sample protective layer insidewithout water infiltration
Thermal conductivity W/(m·k)	GB/T10801.1-2002, JG149-2003		≤0.041	0.033
Apparent density kg/m³	GB/T10801.1-2002, JG149-2003		18.0-22.0	19
The compressive strength perpendicular to the panel MPa	GB/T10801.1-2002, JG149-2003		≥0.10	0.10
Dimensional stability %	GB/T10801.1-2002, JG149-2003		≤0.30	Length Change 0.13
				Width Change 0.15
				Thickness Change 0.24
Compression strength KPa	GB/T10801.1-2002, JG149-2003		≥60	99
Water vapor permeability ng/(Pa··s)	GB/T10801.1-2002, JG149-2003		≤60	4
Water absorption (Volume fraction)%	GB/T10801.1-2002, JG149-2003		≤6	2
Tensile bond strength MPa (Connected with cement mortar)	Original intensity	JG149-2003	≥0.60	0.94
Tensile bond strength MPa (Connected with cement mortar)	Water resistant	JG149-2003	≥0.40	0.54
Tensile bond strength MPa (Connected with Expanded polyphenyl board)	Original intensity	JG149-2003	≥0.10,Destroy interface on EPS Board	≥0.10,Destroy interface on EPS Board
	Water resistant	JG149-2003	≥0.10,Destroy interface on EPS Board	≥0.10,Destroy interface on EPS Board
Operational time H	JG149-2003		1.5-4.0	4.0
Single anchor bolt tensile standard capacity KN	JG149-2003		≥0.30	0.83

Weidi Decorative Insulation Board overall dimension specification

Test Item		Detection standard and requirements		The third party test results
Dimensional Deviation	Length(mm)	GB/T7748-1999	±1.5	-1.0~0
	Width(mm)		±1.5	-1.0~0.5
	Thickness(mm)		±0.5	-0.2~0.1
	Diagonal difference(mm)		≤2.0	0.5
	No straight degree in Border(mm/)		≤2.0	0
	Warping degree(mm/m)		≤3.0	0

Description:

Decoration Veneer Layer: Multi Painting
Carrying Layer: Aluminium plate
Insulation Layer: Rock wood plate / PU Panel

Surface is repeatedly polished, permeated, waterproof , UV coating board is a a new type of inorganic fire
dalle high simulation baord used the special fiber reinforced cement as base material, after roller coating
and spray coating layer the fluorocarbon paint, then printing the prepaired natural stone colour and
pattern UV fluorocarbon film on the based board by the thermal transfer process,after that again roller
coating and spray coating layer the fluorocarbon paint , finally 13 times uv-curable process.

Applications:

Business Organizations

It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project.

Competitive Advantage:

UV coating decorative insulation board due to the special surface patterns, which can be designed not
only like the stone but also can designed as the wood timber veneer. There for its surface can be used
not only indoor but also outdoor.

The features are:
Precious stone pattern, color, luster can be designed as required;
Impact resistance, uv resistance, weather resistance;
More than 25 years outdoor using life .
Waterproof, fireproof, pollution resistance, scratch resistant, friction resistance, acid and alkali
resistance;