Product

Performance

Metal Fluorocarbon Painting Decorative Insulation

Board

Decoration

Layer

UV coating decorative board

Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance

Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years.

Insulation Layer

EPS insulation layer

(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer

(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board

(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board

(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 ()
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 ()

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

Weather resistance

JF149-2003,

JGG144-2004

After weather resistance test,No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack appear.

No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack

JG149-2003,

JGJ144-2004

Impact-resistance strength grade:10

Water absorption  g/,Immersed 24H

JG149-2003,

JGJ144-2004

≤500

21

Wind pressure resistance value   KPa

JG149-2003,JGJ144-2004

Not less than the wind load design value of the project

After 15 kpa level wind load resistance test,,no water seepage

Freezing and thawing resistance

JG149-2003,JGJ144-2004

No surface cracking,hollowing,blistering,

exfoliation

No surface cracking,hollowing,

blistering,exfoliation

Steam flow density g/(·H)

JG149-2003,JGJ144-2004

≥0.85

2.36

Watertightness

JG149-2003,JGJ144-2004

Sample protective layer inside without water infiltration

Sample protective layer

inside without water infiltration

Thermal conductivity W/(m·k)

GB/T10801.1-2002,JG149-2003

≤0.041

0.033

Apparent density kg/m³

GB/T10801.1-2002,JG149-2003

18.0-22.0

19

The compressive strength perpendicular to the panel  MPa

GB/T10801.1-2002,JG149-2003

≥0.10

0.10

Dimensional stability  %

GB/T10801.1-2002,JG149-2003

≤0.30

Length Change 0.13

Width Change 0.15

Thickness Change 0.24

Compression strength KPa

GB/T10801.1-2002,JG149-2003

≥60

99

Water vapor permeability ng/(Pa··s)

GB/T10801.1-2002,JG149-2003

≤60

4

Water absorption(Volume fraction)%

GB/T10801.1-2002,JG149-2003

≤6

2

Tensile bond strength  MPa

(Connected with cement mortar)

Original intensity

JG149-2003

≥0.60

0.94

Water resistant

JG149-2003

≥0.40

0.54

Tensile bond strength  MPa

(Connected with Expanded polyphenyl board)

Original intensity

JG149-2003

≥0.10,Destroy interface on EPS Board

≥0.10,Destroy interface

on EPS Board

Water resistant

JG149-2003

≥0.10,Destroy interface on EPS Board

≥0.10,Destroy interface

on EPS Board

Operational time  H

JG149-2003

1.5-4.0

4.0

Single anchor bolt tensile standard capacity  KN

JG149-2003

≥0.30

0.83

        Test Item

Detection standard and requirements

The third party test results

Dimensional Deviation

Length(mm)

GB/T7748-1999

±1.5

-1.0~0

Width(mm)

±1.5

-1.0~0.5

Thickness(mm)

±0.5

-0.2~0.1

Diagonal difference(mm)

≤2.0

 Mr. Jason

Tel: 86-21-38473059

Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Printable Page   Bookmark this page
Sitemap   XML  

About HiSupplier   Help Center    Customer Service   Friend Links   Site Map   Archives
Browse by: China Suppliers - Hot Products - Products Directory - Offers Directory - Suppliers Directory - Buyers Directory
Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español

Copyright © HiSupplier.com Online Inc. All Rights Reserved.